Dental implant considerations in patients with systemic diseases: An updated comprehensive review.

BACKGROUND: Various medical conditions and the drugs used to treat them have been shown to impede or complicate dental implant surgery. It is crucial to carefully monitor the medical status and potential post-operative complications of patients with systemic diseases, particularly elderly patients, to minimize the risk of health complications that may arise. AIM: The purpose of this study was to review the existing evidence on the viability of dental implants in patients with systemic diseases and to provide practical recommendations to achieve the best possible results in the corresponding patient population. METHODS: The information for our study was compiled using data from PubMed, Scopus, Web of Science and Google Scholar databases and searched separately for each systemic disease included in our work until October 2023. An additional manual search was also performed to increase the search sensitivity. Only English-language publications were included and assessed according to titles, abstracts and full texts. RESULTS: In total, 6784 studies were found. After checking for duplicates and full-text availability, screening for the inclusion criteria and manually searching reference lists, 570 articles remained to be considered in this study. CONCLUSION: In treating patients with systemic conditions, the cost-benefit analysis should consider the patient's quality of life and expected lifespan. The success of dental implants depends heavily on ensuring appropriate maintenance therapy, ideal oral hygiene standards, no smoking and avoiding other risk factors. Indications and contraindications for dental implants in cases of systemic diseases are yet to be more understood; broader and hardcore research needs to be done for a guideline foundation.

Evaluation of the effect of chemical disinfection and ultraviolet disinfection on the dimensional stability of polyether impression material: an in-vitro study.

BACKGROUND: Various methods, chemical and physical, disinfect dental impressions. Common chemicals include 1% Sodium Hypochlorite and 2% glutaraldehyde, while UV radiation is a prevalent physical method. Few studies compare their effects on dimensional stability in polyether impressions. This study aims to assess such stability using different disinfection methods. Therefore, this study was planned to evaluate the dimensional stability of polyether impression material using different disinfection methods. METHODS: This in vitro study compared the effects of chemical disinfectants (1% Sodium Hypochlorite and 2% glutaraldehyde) and UV irradiation on the dimensional stability of polyether impression material. Groups A, B, C, and D, each with ten samples (N = 10), were studied. Group A was untreated (control). Group B was treated with 2% glutaraldehyde for 20 min, Group C with 1% Sodium Hypochlorite for 20 min, and Group D with UV rays for 20 min. A pilot milling machine drill was used to make four parallel holes labeled A, B, C, and D in the anterior and premolar regions from right to left. After sequential drilling, four implant analogs were positioned using a surveyor for accuracy. Ten open-tray polyether impressions were made and treated as described in the groups, followed by pouring the corresponding casts. Distortion values for each disinfection method were measured using a coordinate measuring machine capable of recording on the X- and Y-axes. RESULTS: A comprehensive analysis was conducted using the one-way ANOVA test for distinct groups labeled A, B, C, and D, revealing significant differences in the mean distances for X1, X2, X4, X5, and X6 among the groups, with p-values ranging from 0.001 to 0.000. However, no significant differences were observed in X3. Notably, mean distances for the Y variables exhibited substantial differences among the groups, emphasizing parameter variations, with p-values ranging from 0.000 to 0.033. The results compared the four groups using the one-way ANOVA test, revealing statistically significant distance differences for most X and Y variables, except for X3 and Y4. Similarly, post-hoc Tukey's tests provided specific pairwise comparisons, underlining the distinctions between group C and the others in the mean and deviation distances for various variables on both the X- and Y-axes. CONCLUSIONS: This study found that disinfection with 1% sodium hypochlorite or UV rays for 20 min maintained dimensional stability in polyether impressions.

The internal and marginal adaptation of lithium disilicate endocrowns fabricated using intra and extraoral scanners: An in-vitro study.

OBJECTIVES: The impression technique highly influences the adaptation of ceramic restorations. Not enough information is available to compare the marginal (MF) and internal fit (IF) of endocrowns fabricated with various digitization techniques. Therefore, this in-vitro study aimed to compare the MF and IF of lithium disilicate (LDS) endocrowns fabricated through direct and indirect digital scanning methods. MATERIALS AND METHODS: One extracted maxillary molar was used to fabricate endocrowns. The digitization of the model was performed with (G1) direct scanning (n = 10) utilizing an intraoral scanner (IOS), (G2) indirectly scanning the conventional impression taken from the model using the same IOS (n = 10), (G3) indirectly digitalizing the obtained impression using an extraoral scanner (EOS) (n = 10), and (G4) scanning the poured cast using the same EOS (n = 10). The MF and IF of the endocrowns were measured using the replica method and a digital stereomicroscope. The Kruskal-Wallis test was used to analyze data. RESULTS: The studied groups differed significantly (p<0.001). G2 (130.31±7.87 µm) and G3 (48.43±19.14 µm) showed the largest and smallest mean vertical marginal gap, respectively. G2 and G3 led to the highest and lowest internal gaps in all regions, respectively. With significant differences among the internal regions (p<0.001), the pulpal area demonstrated the most considerable misfit in all groups. CONCLUSIONS: Scanning the impression using an extraoral scanner showed smaller marginal and internal gaps.

The effectiveness of botulinum toxin for temporomandibular disorders: A systematic review and meta-analysis.

OBJECTIVE: The current body of research on utilizing botulinum toxin (BTX) to manage temporomandibular disorders (TMDs) has not yet yielded definitive conclusions. The primary objective of this study was to determine the effectiveness of BTX in pain reduction for TMDs compared to placebo and other treatments. The secondary outcomes evaluated were adverse events, maximum mouth opening, bruxism events, and maximum occlusal force. MATERIALS AND METHODS: A literature search was performed on PubMed, Dimension Publication, Scopus, and Google Scholar. The RoB 2 tool was used for quality assessment. The mean differences in pain scores were estimated to measure the effect of BTX on pain reduction. For adverse events, the risk ratio for the incidence of side effects was calculated. RESULTS: Two hundred and sixty non-duplicate articles were identified; however, only 14 RCTS were included in this review. The total study population included 395 patients. The overall risk of bias showed a low to moderate quality of evidence. Results from 6 studies were reported only narratively; four studies were used for meta-analysis on pain reduction, and five were used for meta-analysis on adverse events. The control used in the meta-analysis was placebo injections. Results of the meta-analysis for pain reduction were statistically insignificant for the BTX group with mean differences at MD = -1.71 (95% CI, -2.87 to -0.5) at one month, -1.53 (95% CI, -2.80 to -0.27) at three months, and -1.33 (95% CI, -2.74 to 0.77) at six months. This showed that BTX treatment was not significantly better than placebo for a reduction in pain scores at 1, 3, and 6 months. Regarding safety, the placebo group showed a relative risk of 1.34 (95%CI, 0.48-6.78) and 1.17 (95%CI, 0.54-3.88) at 1 and 3 months respectively. However, the risks were not statistically significant. There was also no difference in the effectiveness of BTX compared to placebo and other treatments for maximum mouth opening, bruxism events, and maximum occlusal force. CONCLUSION: BTX was not associated with better outcomes in terms of pain reduction, adverse events, maximum mouth opening, bruxism events, and maximum occlusal force. More high-quality RCTs are needed to better understand this topic.

Finite element analysis of stress distribution on residual root structure in socket shield procedure following immediate dental implant placement: an in vitro study.

BACKGROUND: The success of implants in the socket shield technique relies on stress experienced by root fragments within the socket. Although there is no consensus on optimal root fragment thickness, varying thicknesses and dynamic implant placement induce stress in various directions and degrees. This study aimed to assess biomechanical response and stress distribution across different root fragment thicknesses in the socket shield procedure. METHODS: This in vitro study was conducted to assess and compare the stress distribution on residual root structures of varying thicknesses positioned within the labial aspect of the maxillary incisor socket during immediate implant placement of standard dimensions. The procedure involved applying an insertional torque of 40 Ncm, and the analysis was conducted using finite element analysis software. RESULTS: Utilizing the Numerical Technique with Abaqus software for explicit dynamics, von Mises stress and principal strain were analyzed on the root structure and bone under nonlinear contact conditions during implant torque application. For Model A, a loading torque of 40 Ncm was applied vertically on the implant, along with a horizontal force of 20 N on the root structure and bone. Results indicated maximum stress of 12.68 MPa on the root structure with a thickness of 0.5 mm and 5.61 MPa on the bone, with principal strains of 6.82E-03 and 4.10E-03, respectively. In Model B, with a root structure thickness of 1.0 mm, the maximum stress increased to 19.70 MPa, while the bone stress rose to 9.51 MPa, with principal strains of 1.03E-02 and 6.09E-03. Model C, with a root structure thickness of 1.5 mm, exhibited a maximum stress of 21.58 MPa on the root and 10.12 MPa on the bone, with principal strains of 1.16E-02 and 6.10E-03. Lastly, in Model D, with a root structure thickness of 2.0 mm, the maximum stress on the root structure and bone escalated to 28.74 MPa and 11.38 MPa, respectively, with principal strains of 1.55E-02 and 8.31E-03. CONCLUSIONS: As the thickness of the shield increases (ranging from 0.5 to 2 mm) in socket shield procedures with immediate implant placement, both stress on the root fragment and bone and principal micro-strain escalate. However, employing a shield thickness within the range of 0.5 to 2 mm does not lead to any adverse stress generation on the residual root fragment. However, for enhanced safety, it is recommended to restrict the maximum diameter and extension of the root fragment to 1.5 mm when considering implant sizes and socket diameter for the socket shield technique.

Smile aesthetics in Pakistani population: dentist preferences and perceptions of anterior teeth proportion and harmony.

BACKGROUND: This study aimed to evaluate dentist perceptions of attractive smiles in the Pakistani population, considering different dental proportions. METHODS: Maxillary casts and digital images were used to create symmetrical representations of anterior teeth. dentists' preferences for good and bad teeth proportions, width/height ratios, and various dental proportions (golden, recurring esthetic dental (RED), golden percentage, Preston, and local/observed) were assessed using one sample and paired t-test. The Chi-square test was used to determine the gender disparities and factors affecting smile attractiveness. A p-value of ≤ 0.05 was taken as significant. RESULTS: The RED proportion emerged as the preferred choice for normal-sized teeth, with specialists and general dentists favoring it over the golden proportion. For tall teeth, the golden proportion was predominantly preferred. The golden percentage received limited preference for aesthetic smile construction. CONCLUSIONS: The smiles created using the principles of RED proportion were opted as the most attractive by local dentists. Factors such as tooth arrangement, color, and midline were highlighted as essential considerations in aesthetic smile construction.

The role of physiotherapy interventions in the management of temporomandibular joint ankylosis: a systematic review and meta-analysis : Running title: Physiotherapy in TMJ ankylosis.

BACKGROUND: The main aim of this systematic review and meta-analysis was to identify peer-reviewed scholarly journal articles reporting the significance of physiotherapy interventions in managing TMJ ankylosis. In addition, this study aimed to critically appraise the existing evidence on the prevalence and clinical presentation, physiotherapy intervention approaches, efficacy of physiotherapy interventions, adverse effects, and safety of physiotherapy interventions in TMJ ankylosis management. METHODS: An all-inclusive literature search was conducted using the PubMed, Google Scholar, and Scopus electronic databases. The researchers screened the potential articles and assessed for eligibility based on the reported inclusion and exclusion criteria. The quality evaluation tool for observational cohort and cross-sectional studies developed by the National Institutes of Health (NIH) and the Cochrane Collaboration's Risk of Bias Tool were used to assess the quality of the included studies. Researchers also comprehensively analyzed the data, reported the results, and discussed them according to the predominant themes. RESULTS: The primary electronic database search yielded 409 articles, of which 25 were included in this review. A secondary search was conducted from citations of the included studies, yielding 74 articles, of which six were included in the study. A significantly higher prevalence of bony ankylosis than fibrous ankylosis, with an overall effect size of p < 0.00001. In addition, there were significantly more unilateral than bilateral presentations with an overall effect size of p < 0.00001. Moreover, there were 78 reported complications out of 245 subjects according to five included studies demonstrating a significant effect size with p = 0.001 following the treatment protocols. CONCLUSION: This study highlighted the prevalence of bony ankylosis in temporomandibular joint ankylosis, emphasizing its impact on patients' well-being. On the other hand, the results show that physiotherapy is essential to optimize postoperative outcomes and minimize adverse events such as re-ankylosis. Practitioners and healthcare professionals must monitor postoperative recovery and ensure strict adherence to physiotherapy protocols for optimal outcomes.

Oral findings and comprehensive dental management of Moebius syndrome: a systematic review.

BACKGROUND: Moebius syndrome (MS) is a rare, non-progressive, neuromuscular, congenic disease involving the oral maxillofacial region. The present study aimed to describe the oral and extraoral findings in MS patients and their comprehensive dental management. METHODS: A digital search was carried out in PubMed/MEDLINE, Scopus, Web of Science, and Google Scholar, restricted to articles in English from Jan 01, 2000, to Apr 02, 2023, following PRISMA guidelines. The methodological quality of the studies was evaluated following the JBI guidelines. Qualitative analysis was carried out on the overall result, extraoral and intraoral manifestations, considering dental management as appropriate. RESULTS: Twenty-three studies were included, and a total of 124 cases of patients with MS were analyzed. The 82% of patients with MS were younger than 15 years of age. The most frequent extraoral manifestations were blinking and visual problems (78,22%), malformations of the upper and lower limbs (58,22%), bilateral facial paralysis (12,90%), lack of facial expression (12.09%), and unilateral facial paralysis (6,45%). On the other hand, the most frequent oral manifestations were tongue deformities (78,22%), micrognathia (37,90%), labial incompetence (36,29%), cleft palate (22,87%), gothic palate (16,12%), microstomia (15,32%), anterior open bite (15,32%), dental caries (8,87%), and periodontal disease (8,06%). The majority of MS patients were treated by pediatric dentistry (60,86%), using a surgical approach (56,52%), and orthodontic and orthopedic maxillary (43,47%) followed by restorative (39,13%), and periodontal treatments (21,73%). CONCLUSIONS: This systematic review demonstrates that patients with MS present a wide variety of oral and extraoral manifestations, for which dental treatments are planned and tailored to each patient in accordance with oral manifestations. These treatments encompass problem resolution and oral health maintenance, incorporating recent techniques in managing and treating patients with MS.

Analysis of shade-matching ability in dental students: a comparative study under clinical and correcting light conditions.

BACKGROUND: Selecting the ideal tooth shade is essential to the success of aesthetic dental restorations. Students' cognitive abilities are involved in the multifaceted and intricate process of shade matching. Hence, the present study aimed to assess and compare the shade-matching ability of undergraduate dental students in various years of dental education under clinical and correcting light. METHODS: This comparative cross-sectional study was instigated amongst male 4th, 5th, and 6th-year students of the dental complex of King Faisal University, Kingdom of Saudi Arabia. A total of 72 male dental students assessed the shade under clinical (fluorescent light) and correcting light (handheld Dental Base Light) by using VITA Classical shade guides. Statistical analysis was done using SPSS version 23 (Armonk, NY, USA). The Chi-square test was used to evaluate the association between correct and incorrect shade matching under correcting and clinical light. RESULTS: Out of 72 male students, 22(30.6%) were from the 4th year, 26(36.1%) were from the 5th year, and 24(33.3%) were from the 6th year, with a mean age of 22.92 ± 1.01 years. The majority of the 6th-year students selected shade of anterior tooth # 11 correctly under clinical and correcting light, and 3(12.5%) students selected incorrectly under clinical and correcting light, with a statistically significant association among them (p = 0.004). As far as the shade selection of the posterior tooth is concerned, a statistically significant difference was observed under clinical light among all clinical students (p = 0.008). CONCLUSION: The clinical performance of dental students in shade matching improved with advancing years of dental education. Additionally, the shade matching ability of all groups of dental students was superior under correcting light compared to conditions under clinical light.

The efficacy of iatrosedation and music listening techniques in attenuating dental anxiety in patients undergoing dental crown preparation: A randomized clinical trial.

Dental anxiety is a common problem encountered in dental clinics that affects both patients and dentists. Adequate management of dental anxiety is critical for optimal treatment outcomes for the patient. This study aims to assess the efficacy of two anxiety-reduction techniques (iatrosedation and music listening) for dental crown preparation in adult patients. In this clinical trial, 60 patients were randomly assigned to three groups: Group 1, iatrosedation; Group 2, music listening; and Group 3, control. Patients in all three groups underwent dental crown preparation. To measure the anxiety levels of the patients, heart rate was calculated using a pulse oximeter, and verbal rating scale scores were assessed. One-way analysis of variance, post hoc analysis, and Spearman's correlation were used to compare the mean values of the three groups. Significant differences were observed in the heart rate and verbal rating scale scores among individuals in the study groups. A more substantial reduction in anxiety levels was found in patients exposed to iatrosedation (Group 1), which was followed by music listening (Group 2). Recorded heart rate and verbal rating scores were the highest in the control group patients. The iatrosedation technique significantly reduced dental anxiety for patients undergoing dental crown treatment; however, music listening was less effective than iatrosedation. Educating patients regarding the dental care they are about to receive is vital for reducing their anxiety.

Attachment and proliferation of human gingival fibroblasts seeded on barrier membranes using Wharton's jelly-derived stem cells conditioned medium: An in vitro study.

The effect of Wharton's jelly mesenchymal stem cells conditioned medium (WJMSCs-CM) and zinc oxide nanoparticles (ZnO-NPs) on cultured human gingival fibroblasts on various barrier membranes was investigated in this study. In this study, human gingival fibroblasts were prepared and cultured on three membranes: collagen membrane, acellular dermal matrix (ADM) with ZnO-NPs, and ADM without ZnO-NPs. WJMSCs-CM was given to the testing groups, while control groups received the same membranes without WJMSCs-CM. Following 48 and 72 h, 3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) tests were performed to assess cell survival. Cell proliferation on the membranes was also evaluated using 4',6-diamidino-2-phenylindole (DAPI) staining after 48 and 72 h. Field emission scanning electron microscopy was used to determine membrane surface structure and cell adhesion. Nanoparticles were also subjected to an energy-dispersive x-ray analysis to identify their chemical structure. Two-way analysis of variance was used to conduct the statistical analysis. The p-value ≤.05 was considered significant. When ADM-ZnO-NPs were combined with CM, fibroblast viability, and adhesion significantly differed from ADM-ZnO-NPs alone. DAPI results confirmed cell proliferation in all six groups on both experiment days. The abundance and concentrated distribution of cells during cell proliferation were found in CM-containing membranes, specifically the ADM-ZnO-NPs membrane, demonstrating the improved biocompatibility of the ADM-ZnO-NPs membrane for cell proliferation. The other groups did not significantly differ from one another. WJMSCs-CM positively affected the viability and proliferation of gingival fibroblasts, but only marginally. Under certain conditions, ZnO-NPs below a specific concentration increased the biocompatibility of the membranes.

Comparative analysis of different types of occlusal splints for the management of sleep bruxism: a systematic review.

BACKGROUND: Sleep bruxism is a prevalent condition in dentistry practice, characterized by involuntary grinding or clenching of the teeth during sleep. Several therapies, including occlusal splints, have been used to manage sleep bruxism and temporomandibular disorders, including occlusal splints. This study aimed to compare the effectiveness of different occlusal splints in managing sleep bruxism. METHODS: The PICO framework encompasses the characterization of the population, intervention, comparison, and pertinent outcomes. A comprehensive and systematic literature review was conducted on PubMed, Scopus, and Google Scholar to identify grey literature. The search specifically targeted scientific studies published before September 20, 2023. The Cochrane Collaboration Risk of Bias Tool assessed the accuracy of the included Randomized Control Trials (RCTs). The modified Newcastle-Ottawa Scale assessed non-randomized studies. Data were systematically extracted, synthesized, and reported thematically. RESULTS: Out of the total of 808 articles that were evaluated, only 15 articles were found to meet the specified inclusion criteria. Adjustable splints, such as full-occlusion biofeedback splints, were more effective in reducing sleep bruxism episodes, improving patient-reported symptoms, and enhancing overall well-being. The impact of different occlusal sprints on electromyographic activity varies, and potential adverse effects should be considered individually. CONCLUSIONS: This review provides valuable insights into the effectiveness of occlusal splints in managing sleep bruxism. The results of this study indicate that occlusal splint therapy is a viable treatment approach for sleep bruxism.

The flexural strength of 3D-printed provisional restorations fabricated with different resins: a systematic review and meta-analysis.

BACKGROUND: Three-dimensional (3D) printing technology has revolutionized dentistry, particularly in fabricating provisional restorations. This systematic review and meta-analysis aimed to thoroughly evaluate the flexural strength of provisional restorations produced using 3D printing while considering the impact of different resin materials. METHODS: A systematic search was conducted across major databases (ScienceDirect, PubMed, Web of Sciences, Google Scholar, and Scopus) to identify relevant studies published to date. The inclusion criteria included studies evaluating the flexural strength of 3D-printed provisional restorations using different resins. Data extraction and quality assessment were performed using the CONSORT scale, and a meta-analysis was conducted using RevMan 5.4 to pool results. RESULTS: Of the 1914 initially identified research articles, only 13, published between January 2016 and November 2023, were included after screening. Notably, Digital Light Processing (DLP) has emerged as the predominant 3D printing technique, while stereolithography (SLA), Fused Deposition Modeling (FDM), and mono-liquid crystal displays (LCD) have also been recognized. Various printed resins have been utilized in different techniques, including acrylic, composite resins, and methacrylate oligomer-based materials. Regarding flexural strength, polymerization played a pivotal role for resins used in 3D or conventional/milled resins, revealing significant variations in the study. For instance, SLA-3D and DLP Acrylate photopolymers displayed distinct strengths, along with DLP bisacrylic, milled PMMA, and conventional PMMA. The subsequent meta-analysis indicated a significant difference in flexure strength, with a pooled Mean Difference (MD) of - 1.25 (95% CI - 16.98 - 14.47; P < 0.00001) and a high I2 value of 99%, highlighting substantial heterogeneity among the studies. CONCLUSIONS: This study provides a comprehensive overview of the flexural strength of 3D-printed provisional restorations fabricated using different resins. However, further research is recommended to explore additional factors influencing flexural strength and refine the recommendations for enhancing the performance of 3D-printed provisional restorations in clinical applications.

Properties of a novel composite elastomeric polymer vinyl polyether siloxane in comparison to its parent materials: a systemic review and meta-analysis.

BACKGROUND: The effectiveness of newly developed elastomeric polymer hybrid siloxane (PVES), which combines the properties of polyethylene (PE) and polyvinyl siloxane (PVS) elastomers, has been a subject of interest in recent studies. This study aimed to assess the physical properties of hybrid PVES materials by analyzing existing data from recent studies on this topic. METHODS: A systematic literature search was conducted to retrieve peer-reviewed articles published up to February 5, 2023. The population, intervention, comparison, and pertinent outcomes were specified under the PICO framework. The primary data analysis was performed in Microsoft Excel, while statistical analysis used Meta-Essentials. RESULTS: Of the 1152 articles assessed, 14 met the inclusion criteria. The meta-analysis of the selected studies indicated that polyether (PE) and polyvinyl siloxane (PVS) were highly correlated (two-tailed p-values of 0.000 and 0.001, respectively) with the improved tensile strength of vinyl polyether siloxane (PVES) with a significantly positive effect size. Similarly, the hydrophilic characteristics of PVES were significantly improved compared to those of PE and PVS. PE was a significant contributor to the hydrophilic characteristics of PVES, with a two-tailed p-value of 0.000. The effect size was highly positive for hydrophilicity but showed high heterogeneity. It was also observed that the dimensional accuracy of PVES was comparable to those of PE and PVS, with no statistically significant differences among the three materials. CONCLUSIONS: PVES showed promising features, with improved tensile strength and hydrophilic characteristics compared to those of PE and PVS.

Conventional maxillary denture versus maxillary implant-supported overdenture opposing mandibular implant-supported overdenture: Patient's satisfaction.

OBJECTIVES: This study sought to determine the impact of age, gender, and use of maxillary implant-supported overdenture (UISOD) versus conventional denture (CMD) opposing mandibular implant-supported overdenture (LISOD) and the number of years the patient has used their prosthesis on the ratings of satisfaction. This study aimed to assess the long-term influence of different factors on patients' satisfaction with LISODs needing a maxillary prosthesis, helping dentists choose a treatment pathway that leads to a higher satisfaction rate. MATERIAL AND METHODS: This cross-sectional study included 84 participants. They were treated with LISOD opposing either CMD or UISOD from 2015 to 2020. They were all eligible to participate in the study. An oral health impact profile (OHIP-14) questionnaire was given to each patient and filled out by them. OHIP-14 scores were gathered and went under statistical analysis with PASS-11 software to determine the relationship between patients' satisfaction with the scores. RESULTS: Age and gender had no significant influence on how satisfied patients were. Patients with maxillary overdentures showed more satisfaction than the CMD group (p < .05). Moreover, patients' satisfaction decreased with increasing years of prostheses usage (p < .05). CONCLUSIONS: This study demonstrated that satisfaction is related to the type of maxillary prosthesis (conventional or implant-supported) used opposing LISODs and the number of years the patient had used the prostheses.

The Effect of Various Lasers on the Bond Strength Between Orthodontic Brackets and Dental Ceramics: A Systematic Review and Meta-Analysis.

Background/objective: This systematic review and meta-analysis aimed to assess how laser conditioning affected brackets bonded to dental ceramics' shear bond strength (SBS). Materials and methods: The study was conducted by searching Pubmed/Medline, Scopus, Embase, Web of Science, the Cochrane Library, and Google Scholar up to September 14, 2022. In addition, the reference lists of the relevant articles were checked manually. Articles that compared SBS of laser-treated feldspathic, lithium disilicate, or zirconia surfaces with other standard techniques for bonding metal or ceramic orthodontic brackets were considered. Using a random-effects model, data pooling was carried out as the weighted mean difference (WMD). Results: This study initially contained 1717 reports, and following review, 32 articles were deemed suitable for our meta-analysis. The pooling results showed that the treatments with lasers such as "Er:YAG" [WMD = -1.12 MPa; 95% confidence interval (CI): -1.93 to -0.31], "Er:YAG + Silane" (WMD = -3.08 MPa; 95% CI: -4.77 to -1.40), and "Nd: YAG + Silane" (WMD = -2.58 MPa; 95% CI: -3.76 to -1.40) had statistically significant lower adhesion values compared with controls. Contrarily, "Ti:Sapphire femtosecond" demonstrated significantly higher bonding values (WMD = 0.94 MPa; 95% CI: 0.29-1.60). In contrast, other interventions obtained no statistically significant difference in SBS. Conclusions: Most of the laser groups showed results comparable with those of conventional approaches. Although more research is necessary for definitive conclusions, laser treatment may be an effective option for treating the surfaces of ceramic materials.

Exploring the Use of Animal Models in Craniofacial Regenerative Medicine: A Narrative Review.

The craniofacial region contains skin, bones, cartilage, the temporomandibular joint (TMJ), teeth, periodontal tissues, mucosa, salivary glands, muscles, nerves, and blood vessels. Applying tissue engineering therapeutically helps replace lost tissues after trauma or cancer. Despite recent advances, it remains essential to standardize and validate the most appropriate animal models to effectively translate preclinical data to clinical situations. Therefore, this review focused on applying various animal models in craniofacial tissue engineering and regeneration. This research was based on PubMed, Scopus, and Google Scholar data available until January 2023. This study included only English-language publications describing animal models' application in craniofacial tissue engineering (in vivo and review studies). Study selection was based on evaluating titles, abstracts, and full texts. The total number of initial studies was 6454. Following the screening process, 295 articles remained on the final list. Numerous in vivo studies have shown that small and large animal models can benefit clinical conditions by assessing the efficacy and safety of new therapeutic interventions, devices, and biomaterials in animals with similar diseases/defects to humans. Different species' anatomical, physiologic, and biological features must be considered in developing innovative, reproducible, and discriminative experimental models to select an appropriate animal model for a specific tissue defect. As a result, understanding the parallels between human and veterinary medicine can benefit both fields.

Application of density functional theory for evaluating the mechanical properties and structural stability of dental implant materials.

BACKGROUND: Titanium is a commonly used material for dental implants owing to its excellent biocompatibility, strength-to-weight ratio, corrosion resistance, lightweight nature, hypoallergenic properties, and ability to promote tissue adhesion. However, alternative materials, such as titanium alloys (Ti-Al-2 V) and zirconia, are available for dental implant applications. This study discusses the application of Density Functional Theory (DFT) in evaluating dental implant materials' mechanical properties and structural stability, with a specific focus on titanium (Ti) metal. It also discusses the electronic band structures, dynamic stability, and surface properties. Furthermore, it presents the mechanical properties of Ti metal, Ti-Al-2 V alloy, and zirconia, including the stiffness matrices, average properties, and elastic moduli. This research comprehensively studies Ti metal's mechanical properties, structural stability, and surface properties for dental implants. METHODS: We used computational techniques, such as the CASTEP code based on DFT, GGA within the PBE scheme for evaluating electronic exchange-correlation energy, and the BFGS minimization scheme for geometry optimization. The results provide insights into the structural properties of Ti, Ti-Al-2 V, and zirconia, including their crystal structures, space groups, and atomic positions. Elastic properties, Fermi surface analysis, and phonon studies were conducted to evaluate the tensile strength, yield strength, ductility, elastic modulus, Poisson's ratio, hardness, fatigue resistance, and corrosion resistance. RESULTS: The findings were compared with those of Ti-Al-2 V and zirconia to assess the advantages and limitations of each material for dental implant applications. This study demonstrates the application of DFT in evaluating dental implant materials, focusing on titanium, and provides valuable insights into their mechanical properties, structural stability, and surface characteristics. CONCLUSIONS: The findings of this study contribute to the understanding of dental implant material behavior and aid in the design of improved materials with long-term biocompatibility and stability in the oral environment.

Implant-supported prosthetic rehabilitation after Ameloblastomas treatment: a systematic review.

BACKGROUND: Ameloblastoma (AM), the benign counterpart of ameloblastic carcinoma, is a benign odontogenic tumor of epithelial origin, naturally aggressive, with unlimited growth potential and a high tendency to relapse if not adequately removed. Patients with AM treated surgically can benefit from dental implant therapy, promoting oral rehabilitation and improving their quality of life. The present study aimed to determine the survival rate of dental implants placed after surgical treatment of patients affected by AM. In addition, there were two secondary objectives: 1) To evaluate which dental implant loading protocols are most frequently used and 2) To determine the type of prosthetic restoration most commonly used in these patients. METHODS: The Preferred Reporting Items for Systematic Review and Meta-Analysis (PRISMA) guidelines were followed during the study. Searches were performed in three databases (PubMed/MEDLINE, Scopus, and Google Scholar) until November 2023. Additionally, the electronic search was enriched by an iterative hand search of journals related to oral pathology and medicine, maxillofacial surgery, and oral prosthodontics and implantology. Only reports and case series in English from January 2003 to date were included. The Joanna Briggs Institute tool (JBI-Case Reports/Case Series) was used for the study quality assessment. RESULTS: The total number of patients and implants studied were 64 and 271, respectively, all with surgically treated AM. The patient's ages ranged from 8 to 79 years, with a mean (SD) age of 37.3 ± 16.4. Fifty-three percent were male and 47% were female. The range of follow-up duration was 1 to 22 years. An implant survival/success rate of 98.1% was reported. In addition, most of them were conventionally loaded (38.3%). Hybrid implant-supported fixed dentures were the most commonly used by prosthodontists (53%). CONCLUSIONS: Oral rehabilitation with dental implants inserted in free flaps for orofacial reconstruction in surgically treated patients with AM can be considered a safe and successful treatment modality.

Oral Complications Associated with the Piercing of Oral and Perioral Tissues and the Corresponding Degree of Awareness among Public and Professionals: A Systematic Review.

This study systematically reviews the literature to evaluate the potential relationships between oral/perioral piercing and consequent oral complications in the corresponding society. The second objective was determining public/professional sectors' awareness of the subject. This research followed PRISMA and Cochrane guidelines for conducting systematic reviews and searching scientific databases, including PubMed, Scopus, Cochrane, and Google Scholar, until April 2023. Cross-sectional, cohort, and case-control studies in English were deemed eligible. The methodological quality of the included studies was assessed using proper quality assessment guidelines. Of the 965 initial articles retrieved, 34 were considered suitable for qualitative synthesis after screening procedures and removing duplicates and irrelevant records. There appears to be an imbalance between the general public's low and dentists' high awareness. This draws attention to the shortage of professional and societal knowledge-sharing and education initiatives. Women were more than twice as likely as men to have oral piercings. Piercing usage had a low incidence among a cohort of students with a mean age of 16. Merely circumstantial evidence has indicated a plausible correlation between oral and perioral piercings and the emergence of secondary bacterial and fungal colonization, particularly periodontopathogenic bacteria and Candida albicans. Furthermore, several adverse consequences have been observed linked to various piercings-such as lip and tongue piercings. These include caries, gingivitis/periodontitis, dental fractures, enamel chipping/cracks, plaque buildup, bone loss, bleeding, inflammation, and swelling. Given the risks involved and the complications that might impair oral health, the prevalence of oral piercings is alarming. As a result, public health authorities need to firmly support initiatives to raise awareness of the risks associated with oral/perioral piercings. For piercers to enhance their expertise in this field, professional training is necessary because there is a shortage of knowledge on the possible adverse effects of piercings.